Gallery: Big tyres, taped-on tools and lost bidons - All the tech from the toughest UCI Gravel World Championships yet
Bike choices and tech hacks from the 2026 Worlds in Nannup, Western Australia
The dust, and mud, just settled from a weekend of furious racing across every field at the UCI Gravel World Championships, held this year in Nannup, Western Australia.
Pre-race, there was plenty of talk of the area's plentiful gravel roads providing the first 'real' Gravel World Championships course. Both the elite women's and men's races had over 80% gravel, which produced no-holds-barred racing.
Marianne Vos (Netherlands) took victory in the women's race, whilst Magnus Bak Klaris (Denmark) confirmed pre-race speculation that this might be the first year a non-European road pro might win the rainbow jersey by taking a classy win.
We took a look at some of the bikes and tech on offer thanks to experienced cycling photographer Russ Ellis (@cyclingimages). Gravel often provides a more varied and interesting range of things to look at compared to a WorldTour road race, and this year's Worlds was no exception.
Some of the year's hottest new gravel aero race bikes were on display, including the elite men's race-winning Factor Elara and the latest Canyon Grail CFR, both bikes with very healthy 57mm tyre clearances.
There was plenty of tape on tools and tyre plugs to be observed, as well as big rubber, mix-and-match groupset arrangements and some very interesting handlebar notes.
Gravel tech is only getting more exciting; we can't wait to see what next year brings.
Factor must have been pleased to see the Elara ridden to victory in the Elite men's race by gravel pro Magnus Bak Klaris.
This model had some extra tape applied around the computer, something of a theme amongst the race bikes we saw.
Wide to narrow on the Elara front end, which seems to have been well received by cycling tech fans this summer.
Black Inc. handlebars and wheels rounded out this build.
The latest Black Inc. gravel wheels have crazy specs: 30 mm wide internally and 64mm deep.
Some 57mm tyres actually foul the Elara fork, but it's going to depend on the model. This looks to be a 50mm.
Reddish-brown dirt featured a lot over the weekend; racers finished dusted in it.
We liked the colour contrast on the Wilier Triestina model. The headtube won't have been this clean for long.
Roval's latest squared off aero gravel wheels on show here.
This is cool; it's a Gen 4 Specialized Crux which provided a more classic frame silhouette than the more aero Gen 5 model which launched this year.
This bike had 50-34T Shimano 105 chainrings fitted to an Xcadey XpowerS power meter unit. Its rider had also used Rex chain wax, a good choice for the Australian dirt.
Two-piece bars and stems are becoming rarer, but this is still a clean-looking front end, and you can adjust the bar roll very easily.
New with old. A pedal toe strap keeping spare wheels together; some things never change.
This is probably one of the smaller spiders that can be found in Australia.
Bidon dirt. This is a good example of how the Nannup gravel covered everything. These were all in the ‘bottle-lost property’ area.
‘Make us proud’ - here’s a nice bidon message for a rider.
Classic bit of C02 canister taping here.
And here’s a plug tool on the top tube; note the clear protective tape on the top tube for protection.
Here’s one of the very popular Dyna Plug Racer Pro plug tools taped to a stem. Nice colour coordination.
This rider went for a burlier tubeless plug tool just behind their stem.
This one has a tubeless plug loaded up; just jab and push in the event of a flat.
Giant’s sculpted comfort-boosting seatpost is refreshing in the days of aero, everything.
Here’s Factor’s less racy gravel machine, the Aluto, which is more of an all-rounder.
Based on the lost bottles, we assume there were some bottles jumping out on course; this looks like some insurance. A lost bottle could end a race.
Same on the rear; perhaps this was to get through a particular section or an early moment in the race.
Here’s a 45mm Vittoria Terreno T30 in the Italian brand’s recycled brown rubber.
This SRAM bonus shift button was neatly fitted around this bike’s bar tape.
Here’s another inflation tool taped to a seatpost; it’s a common move for gravel racers who carry more spares and tools.
There were plenty of stem notes on display. Check out this aero Apidura top tube frame bag.
This is the Enve G Series dropper post lever. It can be toggled from the drops or the hoods. Neat cable job too.
There were a few dropper posts out there, though the course was relatively smooth.
Here’s the Gen 5 Crux from Specialized. A much more aerodynamic proposition than the Gen 4 model.
Here’s one of Silca’s new gravel tyres. The Protocol 3 is the range’s all-rounder.
The new Canyon Grail was being raced, and we got a close-up look at a couple of bikes. One was Carolin Schiff's, and the other was Larissa Hartog's.
Hartog was running a mix-and-match drivetrain with a wireless XTR rear mech, which should also provide improved chain retention in theory.
This CO2 inflator was neatly installed next to the seat tube bottle for a much cleaner look.
Dura-Ace cranks and power meter with a neat aftermarket 1x chainring. Note the double power meter setup, thanks to the Favero Pro MX SPD pedals.
You can see the chain wax in the chain pins here; the chain guide also looks very sturdy.
The Grail accommodates 57mm tyres comfortably now.
Hartog was using the Coros Dura solar computer, popular with long-distance riders due to its monster battery life.
This shot shows the Grail clearance with a 2.1” tyre fitted at the fork.
‘In doubt, flat it out' - we won’t know the whole story behind this one. I like to think it means throw caution to the wind with your racing, and if you flat, you flat.
Schiff had Schwalbe Race Pro Thunder Burt Speed tyres in a 2.1” size
Here’s Schiff’s inspirational bar message; this is the aero Canyon RACE bar.
Here’s a 2.25” Thunder Burt tread.
Schiff raced to 11th place on the day; her bike was set up a little differently.
This Grail had a different chainset setup: an SRM power meter paired to a 42-tooth Rotor chainring.
This bar has some textured tape applied to the top section and a Canyon Co2 inflator taped on.
The Grail has dedicated holder mounts, but electrical tape is still clearly a popular solution.
This was Sofía Gómez Villafañe’s bike after its day in the dirt.
Thank you for your Cyclingnews subscription. We use our subscription fees to be able to keep producing all our usual great content as well as more premium pieces like this one. Find out more here.
Tom joined the Cyclingnews team in late 2022 as a tech writer. Despite having a degree in English Literature he has spent his entire working life in the cycling industry in one form or another. He has over 10 years of experience as a qualified mechanic, with the last five years before joining Cyclingnews being spent running an independent workshop. This means he is just as happy tinkering away in the garage as he is out on the road bike, and he isn’t afraid to pull a bike apart or get hands-on with it when testing to really see what it’s made of.
He has ridden and raced bikes from an early age up to a national level on the road and track, and has ridden and competed in most disciplines. He has a keen eye for pro-team tech and enjoys spotting new or interesting components in the wild. During his time at Cyclingnews, Tom has already interviewed some of the sport's biggest names including Mathieu van der Poel, Tadej Pogačar and Alberto Contador. He's also covered various launches from brands such as Pinarello, Ridley, Specialized and more, tackled the Roubaix Challenge sportive aboard his own rim-brake Cannondale SuperSix Evo, tested over 20 aero helmets in the wind tunnel, and has created helpful in-depth buying advice relating to countless categories from torque wrenches to winter clothing.
You must confirm your public display name before commenting
Please logout and then login again, you will then be prompted to enter your display name.