Home

Recently on Cyclingnews.com


Mt Hood Classic
Photo ©: Swift

Reviewed February 17, 2005

Sarah Kerlin's Velo Bella Rock Lobster

Photo ©: Tim Brennan

Rock on!

By Anthony Tan

Pretty in pink
Photo ©: Tim Brennan
Click for larger image
Kerlin's Rock Lobster is made from Easton Scandium tubing,
Photo ©: Tim Brennan
Click for larger image
"The best component upgrade I made
Photo ©: Tim Brennan
Click for larger image
Kerlin's custom wheels
Photo ©: Tim Brennan
Click for larger image

One of five American women that took on the might that is European cyclocross at the 2005 'Cross World's in St. Wendel, Germany this January, Velo Bella's Sarah Kerlin took a very respectable top 20 placing and finished as the second-best American rider behind veteran Ann Knapp.

The bike she rides on tackles similarly formidable opposition, going up against the Giants and Bianchis of the world. Somewhat of a cult figure in the Cali MTB scene, Paul Sadoff is the man behind Kerlin's Rock Lobster 'cross machine, and has been building custom frames for over 20 years - starting with his sister back in 1978!

While Sadoff has branched out of the family tree since then, he continues to keep his Santa Cruz, CA, operation ostensibly a one-man band: "If the frame has my signature on it, you can be sure that I built it," he writes on his website. "I don't have a production line in my shop and most likely never will."

Despite being a non-profit cycling team based out of Monterey, CA, the Bella babes have a number of 'patrons', one of which is Rock Lobster for their cyclocross bikes. Kerlin's custom frame is made from Easton Scandium hydroformed tubes, a very popular choice in 'cross circles (is that an oxymoron?), with a True Temper/AlphaQ cyclocross-specific full carbon fork up front.

"It is based on my road bike, with obvious cross specific changes," says Kerlin to Cyclingnews. "It has more clearance for bigger tires, and while having a somewhat compact design, a lot of room is left to shoulder the bike. The angles are fairly similar to the road bike as well."

One of the benefits of having a bike based largely on her road steed, says Kerlin, is that it behaves like a road steed. "A little force into the pedals gives instant acceleration. No loss of power here, and the handling is superb. I can launch off a drop, or fly down a steep rutted chute with no chatter or noodling whatsoever. It is a very comfortable ride, I don't experience any vibration, thanks to the Easton Scandium tubing."

Kerlin mentions that after plenty of road racing and criterium experience the last few years, her riding style is now more attuned to the road rather than a mountain bike: "I spend lots of riding time with my hands on the hoods, it gives a more upright position and shifts my weight to the rear," she says. "No chicken levers, I am almost never up on top of the bars."

However, the Masters 30-34 national champion adds that the hoods on her 'cross bike sit a little higher than her road bike - a little extra leverage for steep ups - and after a bit of to-ing and fro-ing, she's gone with a one centimetre shorter stem, most likely for that extra bit of manoeuvrability. "And of course smaller chainrings - same cogs though!" she quips.

The tubular wheels are key to performance, Kerlin remarks about her custom built wheels. Components are a real hodgepodge; a mix of Shimano Ultegra and Dura-Ace 9-speed, TruVativ, Thomson and SRAM are seen on Kerlin's Rock Lobster in various quantities, with Fi'zi:k's Aliante doing the honours at the rear - literally. "The best component upgrade I made this year was the [Crank Brothers] Eggbeater pedals. The technology here is head and shoulders above any other pedal on the market," Kerlin says.

Photos

For a thumbnail gallery of these images, click here

Images by Tim Brennan

 

Full specification

Frame: Rock Lobster CX, custom geometry, Easton Scandium tubing
Fork: True Temper/AlphaQ CX, full carbon
Colour: Limited edition with Velo Bella pink flamingo mojo

Critical measurements
C of BB to C of seat tube: 510mm
Top tube length, C-C: 540mm
Effective top tube length, C-C: 550mm
Chainstay length: 422mm
Wheelbase: 1009mm
Fork rake: 45mm

Cranks: TruVativ Rouleur crankset, 172.5mm, 38/46
Chain: SRAM PC89
Front derailleur: Shimano Dura-Ace 9 speed
Rear derailleur: Shimano Ultegra 9 speed
Bottom bracket: TruVativ ISIS
Brakes: Paul's Components Neo Retro (F), Touring (R)
Levers: Shimano Ultegra 9 speed
Rear sprockets: Shimano Ultegra 9 speed, 12-27

 

Wheels: custom - Velocity Escape tubular rims, Shimano Dura-Ace 32H hubs, DT Revolution 2.0/1.5/2.0/DT alloy nipples
Tyres: Andre Dugast tubulars, 32mm, glued w/ Vittoria Mastik One

Bar: Pedalsoft Reign 31.8
Stem: Pedalsoft 31.8
Headset: Chris King 1'1/8", custom pink

Pedals: Crank Brothers Eggbeater Triple Ti
Seat post: Thomson Masterpiece
Saddle: Fi'zi:k Aliante, Ti rails
Bar tape: Soma