Home

Recently on Cyclingnews.com


Mont Ventoux
Photo ©: Sirotti

North American Hand Made Bicycle Show -

Indianapolis, Indiana, USA, February 27 - March 1, 2009

Main Page         Previous Part  Next Part

Part 6 - Wrapping up for another year

By James Huang

Thanks for following Cyclingnews’ coverage of the 2009 North American Handmade Bicycle Show. We’ll wrap up this year’s event with a image gallery of just about everything else on hand that we didn’t already cover and hope you’ll enjoy browsing though the gallery. Until next year!

Mike DeSalvo celebrates his tenth year in the business
Photo ©: James Huang
(Click for larger image)
DeSalvo has also rolled back pricing on the 10th anniversary frameset
Photo ©: James Huang
(Click for larger image)
DeSalvo built this bike as a 'no carbon' demonstrator -
Photo ©: James Huang
(Click for larger image)
The slender blades are brazed into an elegantly sloping crown.
Photo ©: James Huang
(Click for larger image)
DeSalvo doesn't do carbon but he does do titanium -
Photo ©: James Huang
(Click for larger image)
DeSalvo built this matching 'hers' bike
Photo ©: James Huang
(Click for larger image)
Even the components are painted to match.
Photo ©: James Huang
(Click for larger image)
Keith Anderson is best known for his paint work
Photo ©: James Huang
(Click for larger image)
Anderson says he spent three months in total
Photo ©: James Huang
(Click for larger image)
From there, he says the rest of the bike took just ten days
Photo ©: James Huang
(Click for larger image)
There's obviously no provision for saddle height adjustment
Photo ©: James Huang
(Click for larger image)
Keith Anderson's sons are lucky kids.
Photo ©: James Huang
(Click for larger image)
Keith Anderson also painted this 'Fruit Stripe' bike
Photo ©: James Huang
(Click for larger image)
A steady hand, a steady hand…
Photo ©: James Huang
(Click for larger image)
Noren built this frame with long-gone Tange Ultrastrong fluted tubing.
Photo ©: James Huang
(Click for larger image)
Noren also commissioned an artist to do this sweet disc wheel finish.
Photo ©: James Huang
(Click for larger image)
Peacock Groove also showed off this gleaming copper-plated rig.
Photo ©: James Huang
(Click for larger image)
Colorado-based Spectrum Powder Works
Photo ©: James Huang
(Click for larger image)
Check out the perfectly applied pinstriping
Photo ©: James Huang
(Click for larger image)
Spectrum Powder Works founder Mark Brandt
Photo ©: James Huang
(Click for larger image)
Brandt says his Fluid Fabrication frames will
Photo ©: James Huang
(Click for larger image)
Not surprisingly, Brandt gave this Fluid 69er frame
Photo ©: James Huang
(Click for larger image)
Spectrum also did the work on this steel frame from Strong.
Photo ©: James Huang
(Click for larger image)
Who needs paint?
Photo ©: James Huang
(Click for larger image)
Joseph Ahearne has earned a solid reputation
Photo ©: James Huang
(Click for larger image)
This unfinished Ahearne frame shows off
Photo ©: James Huang
(Click for larger image)
Dual chain stays have become an Ahearne signature feature.
Photo ©: James Huang
(Click for larger image)
This unique seat stay treatment is another
Photo ©: James Huang
(Click for larger image)
In case you're ever overseas and need some spare change…
Photo ©: James Huang
(Click for larger image)
Nick Crumpton showed off this time trial frame
Photo ©: James Huang
(Click for larger image)
Naturally the aero-profiled seat tube sports a deep wheel cutout.
Photo ©: James Huang
(Click for larger image)
Crumpton is best known for its sweet full-carbon road bikes…
Photo ©: James Huang
(Click for larger image)
…though the 'cross bike looks worthy of a mention, too.
Photo ©: James Huang
(Click for larger image)
NAHBS organizer Don Walker built this bright red track bike
Photo ©: James Huang
(Click for larger image)
Walker also displayed the only track tandem of the show.
Photo ©: James Huang
(Click for larger image)
Nice brazing work here.
Photo ©: James Huang
(Click for larger image)
Walker has opened up Speedway Handmade Bicycle Works in Speedway, Indiana,
Photo ©: James Huang
(Click for larger image)
Relatively new builder Geekhouse brought some of the most striking
Photo ©: James Huang
(Click for larger image)
The segmented fork crowns provided a nice visual transition
Photo ©: James Huang
(Click for larger image)
Geekhouse launched a new dropout design at NAHBS
Photo ©: James Huang
(Click for larger image)
Beefy dropouts feature a thru-axle design.
Photo ©: James Huang
(Click for larger image)
Jordan Hufnagel bases his framebuilding operation
Photo ©: James Huang
(Click for larger image)
This commuter got the full treatment
Photo ©: James Huang
(Click for larger image)
Hufnagel also builds full-on race rigs
Photo ©: James Huang
(Click for larger image)
The rear derailleur housing is neatly run
Photo ©: James Huang
(Click for larger image)
David Kirk has been in business for twenty years now
Photo ©: James Huang
(Click for larger image)
The braced single-arm rear brake housing stop
Photo ©: James Huang
(Click for larger image)
Kirk's is some of the best brazing work we've ever seen.
Photo ©: James Huang
(Click for larger image)
Kirk offers these elegantly curved seat stays as an option.
Photo ©: James Huang
(Click for larger image)
Italian framebuilder Tiziano Zullo
Photo ©: James Huang
(Click for larger image)
This TIG-welded road beauty was just waiting for a home.
Photo ©: James Huang
(Click for larger image)
Flex? Not on the back of this Zullo.
Photo ©: James Huang
(Click for larger image)
Zullo also showed off this red period piece
Photo ©: James Huang
(Click for larger image)
Check out the subtle crease in the top tube.
Photo ©: James Huang
(Click for larger image)
French framebuilder Cyfac was among some of the bigger brands
Photo ©: James Huang
(Click for larger image)
Cyfac says their unique seat stay treatment
Photo ©: James Huang
(Click for larger image)
Cyfac offers BB30 bottom bracket shells
Photo ©: James Huang
(Click for larger image)
Groovy built this showstopper to help bring attention
Photo ©: James Huang
(Click for larger image)
Color coordination to the max!
Photo ©: James Huang
(Click for larger image)
The graphics scheme was inspired by the event's logo.
Photo ©: James Huang
(Click for larger image)
Kelly Bedford was long-time builder, production manager and frame designer
Photo ©: James Huang
(Click for larger image)
Simply beautiful.
Photo ©: James Huang
(Click for larger image)
We're not sure who makes this bottom bracket shell
Photo ©: James Huang
(Click for larger image)
Paint on this K. Bedford custom frame is by Joe Bell.
Photo ©: James Huang
(Click for larger image)
This October frame uses a mix of titanium and carbon fiber.
Photo ©: James Huang
(Click for larger image)
This bike is hot!
Photo ©: James Huang
(Click for larger image)
Christopher Igleheart built this custom 650B mountain bike
Photo ©: James Huang
(Click for larger image)
Igleheart had a number of bikes on display
Photo ©: James Huang
(Click for larger image)
Igleheart apparently wasn’t satisfied with conventional cable hangers
Photo ©: James Huang
(Click for larger image)
We're used to seeing Richard Sachs' masterpieces in pristine condition like this…
Photo ©: James Huang
(Click for larger image)
…but think that Sachs himself prefers to see his 'cross frames like this.
Photo ©: James Huang
(Click for larger image)
A just-for-show frame leaves Sachs' tried-and-true construction techniques
Photo ©: James Huang
(Click for larger image)
Two-time Olympian 'Fast Freddy' Markham is now building frames
Photo ©: James Huang
(Click for larger image)
These aren't actually lugs.
Photo ©: James Huang
(Click for larger image)
Indianapolis-based Shamrock Cycles didn't have to travel far for the show.
Photo ©: James Huang
(Click for larger image)
This was one of the cooler custom racks we saw at NAHBS.
Photo ©: James Huang
(Click for larger image)
Long-time titanium builder Moots brought a diverse array
Photo ©: James Huang
(Click for larger image)
Moots' Gristle 69er featured a new Chris King InSet headset.
Photo ©: James Huang
(Click for larger image)
Form is a new frame label but its builders come from Titus.
Photo ©: James Huang
(Click for larger image)
BB30 bottom brackets are quickly gaining favor among the handbuilt crowd
Photo ©: James Huang
(Click for larger image)
Form also showed off this TIG-welded steel 'cross bike
Photo ©: James Huang
(Click for larger image)
Form also offers mountain bikes
Photo ©: James Huang
(Click for larger image)
Yipsan brought several bikes to NAHBS
Photo ©: James Huang
(Click for larger image)
Yipsan saw fit to polish up this Shimano crank for its show bike.
Photo ©: James Huang
(Click for larger image)
The rear brake cable hanger is cleanly integrated
Photo ©: James Huang
(Click for larger image)
Vicious Cycles displayed this gorgeous snow bike.
Photo ©: James Huang
(Click for larger image)
Just in case there was any question as to what the bike was meant to do.
Photo ©: James Huang
(Click for larger image)
In addition to its excellent singles, Vicious is also well known
Photo ©: James Huang
(Click for larger image)
Rich Adams says he specializes in road and singlespeed frames
Photo ©: James Huang
(Click for larger image)
The rear rack, fenders and chain guard are all crafted in wood
Photo ©: James Huang
(Click for larger image)
The Austin-based True Fabrications trio
Photo ©: James Huang
(Click for larger image)
Road? Mountain? Track? Commuter?
Photo ©: James Huang
(Click for larger image)
Villin builder Alexis Dold
Photo ©: James Huang
(Click for larger image)
Dold believes he is the only framebuilder using forge-welded
Photo ©: James Huang
(Click for larger image)
The Damascus plates give a unique look to various bits
Photo ©: James Huang
(Click for larger image)
Dean demonstrated their capabilities
Photo ©: James Huang
(Click for larger image)
A custom fork and integrated bar are featured up front.
Photo ©: James Huang
(Click for larger image)
Dean can also perfectly 'normal' bikes like this 'cross racer.
Photo ©: James Huang
(Click for larger image)
Alchemy Bicycles had among its collection
Photo ©: James Huang
(Click for larger image)
Check out the tubes brazed right through the chain stays
Photo ©: James Huang
(Click for larger image)
Alchemy angled the dropouts quite a bit
Photo ©: James Huang
(Click for larger image)
Brooks had the usual array of saddles on hand
Photo ©: James Huang
(Click for larger image)
Any guess as to how long this took to do?
Photo ©: James Huang
(Click for larger image)
Every available bit of surface on this Pegoretti
Photo ©: James Huang
(Click for larger image)
Co-Motion developed the Pangea as a do-everything, go-anywhere
Photo ©: James Huang
(Click for larger image)
Vincent Dominguez made the trip from Minneapolis
Photo ©: James Huang
(Click for larger image)
This Hunter mountain bike frame looks normal enough from this side…
Photo ©: James Huang
(Click for larger image)
…but check out the unique dropout treatment on this side!
Photo ©: James Huang
(Click for larger image)
Hunter also included this heavy-duty utiilty bike in the booth.
Photo ©: James Huang
(Click for larger image)
Chuck Schlesinger builds his Sadilah frames one at a time
Photo ©: James Huang
(Click for larger image)
Sillgey definitely wins the prize for brightest booth at NAHBS.
Photo ©: James Huang
(Click for larger image)
CCM is hoping someone needs a ride!
Photo ©: James Huang
(Click for larger image)
Paragon dropouts were a common sight
Photo ©: James Huang
(Click for larger image)
Henry James was on hand showing off some lugs.
Photo ©: James Huang
(Click for larger image)
Looking to build frames yourself?
Photo ©: James Huang
(Click for larger image)
Suzanne Carlson makes custom head tube badges
Photo ©: James Huang
(Click for larger image)
Cane Creek adds a 1" threaded version
Photo ©: James Huang
(Click for larger image)
How's this for detail?
Photo ©: James Huang
(Click for larger image)
Thomson's seat collars are now in production
Photo ©: James Huang
(Click for larger image)
Paul Components showed off a new chain guide
Photo ©: James Huang
(Click for larger image)
Want a custom rack but can't handle the custom price?
Photo ©: James Huang
(Click for larger image)
Paul's new light mount
Photo ©: James Huang
(Click for larger image)
If that doesn't work, there is also a light mount
Photo ©: James Huang
(Click for larger image)
Paul is still going hard at the CNC machining game
Photo ©: James Huang
(Click for larger image)
White Industries had a new set of toe clip-compatible pedals
Photo ©: James Huang
(Click for larger image)
Cartridge bearings and machined aluminum construction are used throughout.
Photo ©: James Huang
(Click for larger image)
Brooks brings back the Imperial model
Photo ©: James Huang
(Click for larger image)
The lower edge is tied together
Photo ©: James Huang
(Click for larger image)
fi'zi:k's wall display shows off its custom capabilities…
Photo ©: James Huang
(Click for larger image)
…though we're certain fi'zi:k won't earn any friends at PETA any time soon.
Photo ©: James Huang
(Click for larger image)
Orbit offers this novel solution for keeping your coffee in your mug
Photo ©: James Huang
(Click for larger image)
Scrub showed off these aluminum rotors.
Photo ©: James Huang
(Click for larger image)
Renova had a variety of innovative designs in the booth
Photo ©: James Huang
(Click for larger image)
Effetto Mariposa is now directing their attention
Photo ©: James Huang
(Click for larger image)
Sheila Moon and Barbara Howe model the latest styles.
Photo ©: James Huang
(Click for larger image)
This Sheila Moon wool jacket
Photo ©: James Huang
(Click for larger image)
Baileyworks showed up with a mountain
Photo ©: James Huang
(Click for larger image)

 

Back to top