Home

Recently on Cyclingnews.com


Bayern Rundfahrt
Photo ©: Schaaf

North American Hand Made Bicycle Show,
San Jose, California, March 2-4, 2007

Why just cap the stays, when you can do this?
Photo ©: James Huang
(Click for larger image)
Ahearne Cycles' commuter, all dressed up and ready to go.
Photo ©: James Huang
(Click for larger image)
Integrated lock holder means one fewer thing
Photo ©: James Huang
(Click for larger image)
Ahearne Cycles uses several different head tube badges,
Photo ©: James Huang
(Click for larger image)
Joseph Ahearne supplements his now-trademark twin chainstays
Photo ©: James Huang
(Click for larger image)
ANT Cycles equipped this "Basket Bike"
Photo ©: James Huang
(Click for larger image)
How many bags of groceries fit in there?
Photo ©: James Huang
(Click for larger image)
ANT Cycles has been building commuter bikes
Photo ©: James Huang
(Click for larger image)
Cool copper ANT Cycles head tube badge
Photo ©: James Huang
(Click for larger image)
A little nicer than the rack you'll find at your local shop…
Photo ©: James Huang
(Click for larger image)
ANT's "Rohloff B" commuter is ready
Photo ©: James Huang
(Click for larger image)
Like many bikes at NAHBS, this rear rack
Photo ©: James Huang
(Click for larger image)
Who said commuters had to be cheap and ugly?
Photo ©: James Huang
(Click for larger image)
Particularly distinctive fork crown on this Bilenky townie.
Photo ©: James Huang
(Click for larger image)
Beautiful finish work and detailing on the Bilenky front basket.
Photo ©: James Huang
(Click for larger image)
Not all of the embellishment is purely aesthetic.
Photo ©: James Huang
(Click for larger image)
The customer who commissioned this Bilenky townie bike
Photo ©: James Huang
(Click for larger image)
Curvy stays and impeccible pinstriping.
Photo ©: James Huang
(Click for larger image)
Polished stainless steel seat clamp.
Photo ©: James Huang
(Click for larger image)
Long-term builder Bill Rider crafted this commuter for his own wife, Eileen.
Photo ©: James Huang
(Click for larger image)
Cleanly curved tubing transformed from top tube
Photo ©: James Huang
(Click for larger image)
DeSalvo offered up this version of the townie bike.
Photo ©: James Huang
(Click for larger image)
Drum brakes were popular at NAHBS,
Photo ©: James Huang
(Click for larger image)
A rarely-seen NEW Sturmey-Archer internally geared rear hub.
Photo ©: James Huang
(Click for larger image)
Engin Cycles is a new builder, but you couldn't tell by looking at this.
Photo ©: James Huang
(Click for larger image)
Internally-geared Nexus hub and shifter from Shimano
Photo ©: James Huang
(Click for larger image)
Clever chainstay bridge and chainguard.
Photo ©: James Huang
(Click for larger image)
Engin Cycles is based in Philadelphia, the "City of Brotherly Love",
Photo ©: James Huang
(Click for larger image)
I'm not sure what is meant to go on this Engin Cycles front rack,
Photo ©: James Huang
(Click for larger image)
Head tube badge from Engin Cycles.
Photo ©: James Huang
(Click for larger image)
Fraser Cycles offers its PackMule for heavy hauling.
Photo ©: James Huang
(Click for larger image)
The PackMule is ready and able…
Photo ©: James Huang
(Click for larger image)
Custom-built rack on the PackMule.
Photo ©: James Huang
(Click for larger image)
Hard to say how often the Fraser Cycles PackMule
Photo ©: James Huang
(Click for larger image)
Custom thermos carrier from Independent Fabrications.
Photo ©: James Huang
(Click for larger image)
IF's classic head tube badge.
Photo ©: James Huang
(Click for larger image)
IF entered this titanium "Swoopster" into Shimano's Alfine competition.
Photo ©: James Huang
(Click for larger image)
Who knew a stepthrough frame could look this good?
Photo ©: James Huang
(Click for larger image)
Heavy duty rear rack on this Inglis doubles as a fender support.
Photo ©: James Huang
(Click for larger image)
Curtis Inglis built this commuter for his wife.
Photo ©: James Huang
(Click for larger image)
Beautiful and purposeful townie bike from Inglis Cycles.
Photo ©: James Huang
(Click for larger image)
Start loading!
Photo ©: James Huang
(Click for larger image)
Ira Ryan is another new builder with a keen sense of style.
Photo ©: James Huang
(Click for larger image)
Beautiful stainless steel head tube badge from Ira Ryan.
Photo ©: James Huang
(Click for larger image)
Brake levers are integrated directly into the handlebar for an ultra-clean look.
Photo ©: James Huang
(Click for larger image)
A little bit of adornment for the normally drab handlebar.
Photo ©: James Huang
(Click for larger image)
Old Man Mountain took 1st prize honors
Photo ©: James Huang
(Click for larger image)
This aluminum handlebar was crafted mostly from billet aluminum
Photo ©: James Huang
(Click for larger image)
Beautifully-profiled chainguard.
Photo ©: James Huang
(Click for larger image)
Old Man Mountain designed the rear wheel attachment
Photo ©: James Huang
(Click for larger image)
Front rack or cow catcher? Maybe a little bit of both?
Photo ©: James Huang
(Click for larger image)
Peacock Groove's decidedly aggro commuter
Photo ©: James Huang
(Click for larger image)
Peacock Groove pride.
Photo ©: James Huang
(Click for larger image)
Swoopy stays and bold styling characterize this commuter
Photo ©: James Huang
(Click for larger image)
When clamps are just too ugly to mount your fenders.
Photo ©: James Huang
(Click for larger image)
Classic styling from Retrotec.
Photo ©: James Huang
(Click for larger image)
Ultra-clean rear dropout and disc mount from Retrotec.
Photo ©: James Huang
(Click for larger image)
Does this come in my size?
Photo ©: James Huang
(Click for larger image)
Perfectly curved tubing on the Retrotec.
Photo ©: James Huang
(Click for larger image)
Rock Lobster's entry in Shimano's Alfine contest
Photo ©: James Huang
(Click for larger image)
Clean and purposeful with little unnecessary embellishment.
Photo ©: James Huang
(Click for larger image)
That big red thing is a motor for when Sycip's
Photo ©: James Huang
(Click for larger image)
Battery packs are located in the trunk atop the rear rack.
Photo ©: James Huang
(Click for larger image)
Electric motor drives the crank directly, not the rear wheel.
Photo ©: James Huang
(Click for larger image)
Sycip's cute front rack, already pre-loaded!
Photo ©: James Huang
(Click for larger image)
Sycip's commuter is a little bit nicer than the one I used to use…
Photo ©: James Huang
(Click for larger image)
Tom Oswald crafted a clean custom fender mount.
Photo ©: James Huang
(Click for larger image)
Cool double crown and light mount from Oswald Cycles.
Photo ©: James Huang
(Click for larger image)
Beautiful long-point lugs.
Photo ©: James Huang
(Click for larger image)
Giant Schwalbe Big Apple tires
Photo ©: James Huang
(Click for larger image)
Not a bad view on the way to the office.
Photo ©:
(Click for larger image)